Tech Tip: Which Excitation Should I Use for My Fluorophore?


Which NIGHTSEA excitation and emission combination should I use for my fluorophore (GFP, FITC, RFP…)?

  • Table 1 lists the NIGHTSEA wavelength sets, including the most intense part of the excitation range and the cutoffs of the paired emission filters.
  • Table 2 lists the wavelength set that we recommend for a wide range of fluorescent proteins and dyes. If you do not see your fluorophore on the list please let us know and we will add it. If you see any errors or can verify performance from your personal experience, please let us know that also.

What is the basis for the recommendations?

  • Our recommendations are based on either working knowledge with that fluorophore – our own or feedback from customers – or on published spectral data. You can find a list of spectral databases on our web site (link). Two of our own favorites are FPbase and Searchlight, but there are quite a few others.

Table 1 – NIGHTSEA wavelength sets

Wavelength set names are sets based on the color of the excitation light, not on the color of the fluorescence that they will excite (see article on color coding). Note that with the Royal Blue excitation source we offer both longpass and bandpass filters.

 

Designation Excitation Emission
UV – Ultraviolet 360 – 380nm 415nm longpass
VI – Violet 400 – 415nm 450nm longpass
RB – Royal Blue 440 – 460nm 500nm longpass
RB – Royal Blue 440 – 460nm 500 – 560nm bandpass
CY – Cyan 490 – 515nm 550nm longpass
GR – Green 510 – 540nm 600nm longpass

 


Table 2 – Fluorophores and recommended NIGHTSEA wavelength sets

Key:

  • Shaded/numbered cells – Fluorophores with shaded cells indicate that more than one Light and Filter Set might work for this fluorophore. This reflects a trade-off between maximizing the excitation efficiency and maximizing the emission capture. The color of the cell shading corresponds roughly to the emission color you would expect to see with that set.
    • 1 – our first choice based on either direct experience or on analysis of the spectra
    • 2 – our second choice
  • Basis
    • W‘ – working knowledge
    • s‘ – analysis of spectra
  • Standard disclaimer – The recommendation for the use of a wavelength set is not a guarantee that it will work in any given application. In addition to spectral matching, performance is also related to the total amount of fluorescing material and its fluorescence intensity.

 

Fluorescent Protein/Dye UV  VI  RB CY GR Basis
Alexa Fluor 488 X W
Alexa Fluor 555 X s
Alexa Fluor 568 X s
Alexa Fluor 594 X s
amCyan1 X s
Aquamarine X s
Calcein X W
Cerulean X s
CFP X W
Citrine X s
Clover X s
Cy3 X s
CyOFP1 X s
CyPet X s
DAPI X W
Dextran-FITC X s
Dextran-Texas Red X s
Dextran-TRITC X s
DiI X s
DsRed 2 1 W
E2-Orange X s
EBFP X s
EBFP2 X s
ECFP X W
EGFP X W
eqFP670 X s
EYFP X W
FITC X W
Fluorescein X W
FusionRed X W
Fluorescent Protein/Dye UV  VI  RB CY GR Basis
GFP X W
Hoechst X W
iFP1.4 1 2 s
KO1 X s
LSSmOrange X s
Lucifer Yellow X W
mAmetrine X s
mApple X s
mAzamiGreen X s
mBanana X s
mBeRFP X s
mCardinal X s
mCherry1 X W
mCitrine X s
mEmerald X s
mGarnet2 X s
mHoneydew 1 2 s
MiCy X s
mKalama1 X s
mKate X s
mKate2 X s
mKeima X s
mKO2 X s
mKusabira-Orange X s
mMidoriishi-Cyan X s
mNeonGreen X s
mNeptune X s
mOrange X s
mOrange2 X s
Fluorescent Protein/Dye UV  VI  RB CY GR Basis
mPapaya1 X s
mPlum X s
mRaspberry X s
mRFP1 X s
mRFP1.2 X s
mRuby X s
mScarlet X s
mStable X s
mStrawberry X s
mTagBFP X s
mTangerine X s
mTurquoise2 1 2 s
mUKG X s
mWasabi X s
RFP 2 1 W
Rhodamine B X W
Sapphire 2 1 s
Superfolder GFP X s
SYFP2 X s
TagBFP 1 2 W
TagCFP X s
TagGFP2 X s
TagRFP 2 1 s
TagRFP-2 2 1 s
TagYFP X s
tdTomato 1 2 W
Texas Red X s
TRITC X W
Venus X s
YFP X W
Ypet X s
ZsGreen X s

 

Table 2 Notes:

  • 1 – Our Green (GR) excitation/emission set can work with mCherry but is not optimal. We know of many people who have great success and others for whom it just did not work. It is likely related to the amount of fluorescing material and the strength of the expression. It is worth trying, but you should purchase only with the understanding that you need to try it in your application and might need to return it.

 


Examples of NIGHTSEA utility: